5 Best Tile Saws
With a lot of manufacturers in the market, it’s hard to choose the right tile saw.
In this review, we’ve gathered a list of top 5 tile saws that are available in the market so that you don’t end up wasting a lot of time online searching for the best tile saw.
Dewalt D24000 Tile Saw
The first tile saw that made to the top of the list is the Dewalt D24000 Tile Saw.
It’s a wet tile saw that comes with a water reservoir and is well equipped with all the necessary features you’re looking for in any tile saw.
This tool comes with a 1.5 horsepower motor which equivalent to about 15-amps. This powerful motor generates enough power to allow the tool to cut through any hard tiling material without any problem.
The water nozzle it comes with helps to cool down the blades so that it can work efficiently without any breakdown.
The Dewalt D24000 Tile Saw comes with 10” blade which is made from diamond so as to give the machine more durability and also cut any hard material with ease.
This tile saw weights only 69 pounds. It isn’t the best light tool available, but it can be moved to different locations without any problem.
The DeWalt model is capable of handling large materials that are up to 18” wide.
You can make plunge cuts easily with this new Dewalt D24000 Tile Saw when making power outlets, a/c registers and other applications within a short period of time. It is also capable of making miter cuts and has positive stops at 45-degrees and 22.5-degrees; this provides a more accurate result for your working pieces.
The Dewalt D24000 Tile Saw has a good money to value ratio. The device seems to be expensive comparing to other tile saws, but it’s not when you consider the value it offers.
The tile saw comes with a wide table that offers more stability and also has thick rolling rubber that helps hold slippery tiles and also provide more safety by reducing fewer damages.
The Pros Of Dewalt D24000 Tile Saw
- The device is compact in nature, which means it has easier mobility and is easier to set up in any jobsite.
- Its dual water nozzle helps prevent spray of excess water; you can minimize water loss when using this device.
- It comes with flexible miter stops with locks at 45-degrees and 22.5-degrees; this helps the user make accurate angle cuts.
- The table has a thick rolling rubber that prevents slippery materials falling down or getting damaged.
- The Dewalt D24000 Tile Saw can be used by both newbie and professionals; it’s a very handy tool that can be used by everyone.
- Some users reported that when you increase the howls you can lose the adjustments and bearing after working for some time with the tool, a lot of users believe the previous model is better than this one.
- The Dewalt D24000 Tile Saw is good at cutting ceramic materials only; it will not work well on hard stones, which means the saw is good for home use and DIY projects.
- When making angle cuts the device can spray excess water which is beyond the tray extension.
SKIL 3550-02 Tile Saw
The next tool is the SKIL 3550-02 Wet Tile Saw.
This is a powerful saw that can be used by any handyman. Skil is well known for producing exceptionally high-quality products in the power tools industry. This SKIL model isn’t left behind when it comes to performance and durability.
It’s capable of producing perfect angle cuts with clean results. It comes with a table that has hydro lock system so that the saw can regulate water spillage and keep your working area neat and clean.
The hydro lock has lower and upper guard to help it serve this purpose. The slide it comes with can handle wider materials that are up to 18”x18”. This allows the blade to move further to 1.75 above the table so that it can make deeper cuts.
The motor has the power of 5-amp and delivers a no-load speed of 3600 revolutions per minute. This power is enough to drive the machine to perform most of the cutting tasks in the workshop effectively.
It’s a very lightweight tool weighing about 22 pounds only. This means the device can be lifted by even teenagers or women.
The SKIL 3550-02 Tile Saw comes with an adjustable fence that allows users to make rip cuts at 22.5-degrees and 45-degrees and still achieve accurate results.
The table it comes with is a very strong and durable one because the top is made from aluminum. It is resistant to rusting and also offers more stability during operation. It has a cord wrap that provide safe storage and easy mobility.
The Pros Of SKIL 3550-02 Tile Saw
- The SKIL 3550-02 Tile Saw offer clean and smooth work finishes due to the hydro lock system that holds the water.
- The device has ease of mobility because of the code wrap.
- The strong diamond blades work effectively than most other tiling saws.
- The SKIL 3550-02 Tile Saw is capable of giving precise and accurate angle cuts.
- It’s a handy tool when it comes to dealing with small jobs.
- Aligning and fixing the fence can be somewhat difficult; fence adjustment certainly needs to be improved for upcoming models.
- The material which is used to make the blade guard becomes muddled when you start working with the device.
QEP Tile Saw
The QEP Master Tile Saw weights only 8 pounds. As you guessed, this is absolutely the lightest tile saw you’ll ever come across. When you look at this unbelievable weight you know that you can lift this device with a few fingers. For those who are desperately looking for a compact and portable device, this is their best option.
The QEP Tile Saw has 3/5 horsepower motor which allows the blades to cut different materials such as ceramic, granite, terracotta and other tiling materials. The QEP Tile Saw also comes with a diamond blade that’s 4” long, this isn’t a big deal but still has a lot of cutting capacity.
The table it comes with can handle wide tiles without any problem because it can be extended. Making rip and angle cuts are easier and can be adjusted to different levels.
Users can make miter cuts at 45-degrees and 22.5 degrees with ease.
The QEP Tile Saw is equipped with a water catch system that minimizes water runoff and will allow you to recycle the water back to reservoir so that you can minimize the use of water.
The QEP Tile Saw is really a lightweight and affordable tool that can execute different projects.
The Pros Of QEP Tile Saw
- Since it’s a lightweight tool, it’s easier to move the device to any job location without facing any difficulty, due to its lightness you can carry the tool around with you all day long.
- Despite its smaller size, it can still make angle cuts effectively.
- The QEP Tile Saw can handle most small and medium size tile cutting at any job site.
- Because it’s a compact tool, it’s easier to set up the device into action, unlike other tiling saws that are complex to set up and operate.
- When you look at the size of the tool you know that it’s not designed to deal with tough and complex projects, the QEP Tile Saw can be slow sometimes more especially if you’re dealing with hard materials like stones.
- Cannot handle wider tiles, and also cannot cut multiple tiles at once due to the nature of the blades.
Dewalt D24000S Tile Saw
The DeWalt D24000S Wet Tile is among the best tiling saws.
It comes with a durable stand that gives users the freedom to work comfortably with the saw.
It has a powerful 15-amp motor which is enough to cut even the hardest stone or any tiling material you can think of. It is capable of making diagonal cuts of 24”x18”.
This tiling saw isn’t the bulky type, it weighs about 69-lbs. It’s still considered a compact device and can be handled by a single person.
The DeWalt D24000S Tile saw comes with a rail system that’s made from stainless steel. This gives the user more accuracy when operating the device.
The plunge feature is very effective because you can make plunge cuts with ease such as a/c registers and electrical outlets.
It’s capable of making bevel cuts at 45-degrees and 22.5-degrees, and all this can be done quickly without waste of time. You can make pavers and V – shapes effectively.
There is also a water nozzle which is adjustable to help reduce overspray and also minimize mist.
The price of the DeWalt D24000S Tile saw is good when compared to its outstanding features. It’s definitely an affordable tool when you compare it with other tools within its category.
The Pros Of Dewalt D24000S Tile Saw
- The DeWalt D24000S Tile saw provide more accurate cuts than most saws out there, the saw if used properly doesn’t damage your working pieces.
- The DeWalt D24000S Tile saw is easy to use, can be used by newbie and professionals.
- It is equipped with the water spillage control system so as to reduce overspray.
- It is built with durable materials; that’s why the tool can last for years without break down.
- The DeWalt D24000S Tile saw is considered as multi-purpose saw because it can be used in various applications.
- The table size isn’t satisfactory to some users because they complained it’s not capable of holding larger tiles.
- The built in beaker it comes with can sometimes trip.
Pearl Abrasive VX10.2 Tile Saw
The Pearl Abrasive VX10.2 Wet Tile Saw is a good option for anyone that’s looking for advance features in any tiling saw.
It’s a compact saw that can be moved easily.
It has 2 horsepower motor which is equipped with a cooling fan so that it can work at optimum level. The power of this motor is enough for the tool to be used for professional projects.
This tool doesn’t come with a diamond blade. The blade is made with carbon steel, but it’s still strong and durable. It can cut through most tiling materials like porcelain, marble, and ceramic.
It comes with a 10” blade, the blades capable of making cutting depths of up to 3.25”.
The Pearl Abrasive VX10.2 Tile Saw comes with rail guide made from stainless steel and this offers more precise and accurate cuts.
It has a water drip tray that holds all the particles that are generated as a result of cuts from the working materials. There is also a water pump and universal wrench that cools the blades at all times to prevent overheating.
Most of the materials that were used to make the components of this tool are resistant to corrosion.
The Pros Of Pearl Abrasive VX10.2 Tile Saw
- The Pearl Abrasive VX10.2 Tile Saw can be moved to different job locations.
- The drip tray can hold all the wastage materials generated as a result of using the saw.
- Because of its stability, it can be used for both professional and beginner use.
- The table it comes with is very smooth and durable; it can last for years without damage or breakdown.
- The Pearl Abrasive VX10.2 Tile Saw can’t make angle cuts unless you buy extra accessories like miter block which will allow the user to make angle cuts.
- The table extension doesn’t have a water catch system.
- The Pearl Abrasive VX10.2 Tile Saw isn’t a full heavy duty saw, but it’s still considered as a heavy saw because it weights more than other tools that are within its category. We can just say that the Pearl Abrasive VX10.2 Tile Saw has a medium weight. It’s still however considered a compact device.
Best Rated Tile Saw That Cost Less Than $100
In this section of tile saw review, we’ll take a look at the best tile saws that are under the $100 mark.
For most beginners and DIYers, they’re looking cheap saws with considerable features as well. You can find a lot of cheap tile saws which are equipped with powerful features that can do the job effectively.
If you’re looking for cheap tile saws, we’ll make things easier for you by listing some of the best-rated tools that don’t cost much out of your pocket.
QEP 22400Q Tile Saw
If you’re looking for a solid performer you should definitely go with the QEP 22400Q tile saw.
It’s a portable saw that can take care of all your house project needs.
It’s a dependable saw that comes with 3/5 horsepower motor and capable of executing a lot of DIY projects or at the construction site.
It’s a 4” saw that’s equipped with diamond blades, it also comes with a tilting table. It has an adjustable rip and can make different angle cuts. If you’re looking for a simple saw at an affordable rate, the QEP 22400Q tile saw is a good choice.
Best Stainless Steel Tile Saw
SKIL 3540-02 Tile Saw
The SKIL 3540-02 tile saw comes with an adjustable rip fence and a miter gauge to allow the making of different shapes.
The stainless steel at the top is resistant to corrosion.
It comes with its own water cooling system that allows users to work efficiently with the blades. It’s capable of making bevel cuts at up to 45-degrees.
The SKIL 3540-02 tile saw is a recommendable machine that doesn’t cost much. It has earned a 4.5 out 5-star rating and has more than 500 positive customer reviews.
Best Ceramic Tile Saw
QEP 22650Q Tile Saw
With its ¾ horsepower motor, the QEP 22650Q Tile Saw can be used on multiple tasks when it comes to DIY projects.
The device runs at 3600 revolutions per minute. It’s capable of making curves and other shapes that are needed in various tile cutting projects.
The QEP 22650Q Tile Saw can be used to cut ceramic, granite, marble and porcelain. The blades are made with steel and the tool has rubber foot pads, it has a table extension of 8”.
This is an affordable tool that’s designed to take care of small and medium size tile cutting jobs.
Best Budget Tile Saw
DEWALT D24000 Tile Saw
DeWalt tools are legends in the power tools industry.
The DEWALT D24000 Tile Saw is a 10” blade saw that’s designed to provide more efficiency and accurate results.
The rail system installed in the device gives more precise cuts and provides more room for diagonal cuts. It can be used to make different miter cuts. This makes it easier to make different shapes when the need arises. It’s able to cut tough materials with ease because of its 1.5 horsepower motor.
It has a rip capacity of 24” and a cutting depth of 3-1/8. The rail system is made from stainless steel.
The DEWALT D24000 Tile Saw also comes with dual water nozzle allowing users to have full control of the water system. It is a well versatile saw that comes with powerful design and is able to cut tiles very fast.
Cleaning and maintaining the device is easier because it comes with a removable cutting cart. It’s a compact saw that’s easier to carry the tool around and can be stored easily. The entire package weighs 69 lbs. Dealing with this weight isn’t a big deal.
The DEWALT D24000 Tile Saw comes with 3 months money back guarantee, this shows that it’s a qualitative tile saw, you also get a 3-year warranty and free service of up to 1 year.
The rubber top prevents your materials from sliding when working with the device.
The Pros Of DEWALT D24000 Tile Saw
- It can cut different materials with ease, the powerful motor has 1.5 horsepower, and the DEWALT D24000 Tile Saw can be used in a wide range of applications.
- The rail system is made from stainless steel, this help users achieve more accurate cuts with ease.
- The water control system is really good; it can be adjusted to prevent overspray and is removable which makes cleaning easier.
- The cutting cart can be removed as well.
- The DEWALT D24000 Tile Saw makes too much noise, there is the need to use hearing protection so as to avoid ear injuries.
- The machine components need to be taken care of properly because they might rust with time.
SKIL 3540-02 7-inch Wet Tile Saw
If you’re on a tight budget, the SKIL 3540-02 tile saw can be the best choice for you. The device is rated on Amazon as the best tile saw.
Its components are made from tough materials that are resistant to corrosion because most of the materials are made with stainless steel.
The SKIL 3540-02 tile saw can support large tiles that are up to 12”x12”, the sliding extension offers a lot of advantages.
It’s a flexible device allowing the user to make bevel cuts from 0-45 degrees. It’s equipped with adjustable rip fence and a miter gauge to give more accuracy when making curved and straight line cuts. The surface is very strong because it’s made with stainless steel.
It comes with a water reservoir that cools the machine and provides lubrication during operation.
It comes with 4.2-amps power motor, this is enough to cut through most tiling materials without facing any difficulty. It’s a 7-inch device that’s able to make significant cutting depth.
The Pros Of SKIL 3540-02
- The SKIL 3540-02 tile saw is made with durable materials.
- Adjustable rip fence for easy miter cuts.
- Comes with a reservoir that cools down the device.
- It has a double action cooling system.
- The bevel range is from 0-45 degrees.
- The SKIL 3540-02 tile saw is very cheap.
- You have to be careful when using the device or you’ll end up damaging the tiles, you need some practice before you get the hang of it.
- The SKIL 3540-02 tile saw is suitable for handling small jobs only.
Tile Saw Comparison
Normally cheap tile saws are designed to deal with smaller projects for DIY projects at home and they wear out easily, their motor isn’t really powerful enough to be used in tough projects, they’re less durable than the less heavy-duty saws.
If tile cutting is a part of your profession it’s always a good idea to have the heavy duty tile saw by your side because it’s more effective and durable.
The best tile saws come with a good warranty of at least 1 year. Most of the time it’s 3 years, this shows that the saw is of high quality and it can do what it has promised to do. A tile saw that comes with warranty gives you a peace of mind knowing that you’re covered if the device breaks within the warranty period.
Cutting through hard and brittle materials can be a challenging task. Most tools out there can claim to cut ceramic materials with ease but they end up destroying the material by producing unwanted results. Cutting through brittle materials like ceramic tile, porcelain, granite, slate, and marble requires a special saw that will give accurate results. Tile saws are specifically designed for such purposes, a tile saw can cut any tile by scraping at higher speed.
Most effective tile saws are equipped with a sharp diamond blade which is really tough to withstand and cut through any hard material that comes into its way.
Tile saw, if used properly, doesn’t damage the working material. It provides a smooth finish.
Because of the fast speeds of the blades, tile saws produce a lot of heat during operation, that’s why most tile saws come with a water reservoir and a pump that is used to cool down the blades and allow the blades to easily pass through the tiles. The main function of water in any tile saw is to prevent overheating of the blades so as to ensure you’re working effectively with the device.
There are many products in the market to choose from but there is a need to understand how tile saws work and the features you should look for in any tile saw before spending your money.
As a professional contractor, you want a tool that will deliver the best possible results when you’re working at any job site.
In this tile saw guide we’ll cover almost every aspect of tile saw you need to know and then make some recommendations on some of the best tools that are available in the market.
Whenever you’re looking for any product you’ll certainly find a lot of options in the market, the question is how do you know the right one?
The best way is to know the specification of each product and see whether it will solve your problem or not.
Tile saws aren’t an exception to this rule, you should know the basic features that come with each saw and then see how it’s going to help you with your tile cutting projects.
Before we jump onto the features which you should be looking for in any tiling saw let us go through the different types of tile saws that are available.
Wet Tile Saws
Wet tile saws are the most effective tile saws when it comes to performance. They’re better than any other saw type. They’re the best option when cutting multiple tiles, making different shapes, or cutting other ceramic materials.
Wet tile saws resemble table saws. The difference is that wet tile saws come with water reservoir which is mostly used to mount the saw.
Wet tile saws are of 2 types. The first type comes with a re-circling pump while the second type is pump-less. Tile saws with recycling pumps can re-use the water from the main source and it’s not necessarily connected to a faucet, while saws that come as pump-less require a continuous supply of water in order to cool down the blades.
Each wet tile saw comes with its unique features. You should find the best features you want before making a purchase.
Hand Held Or Manual Tile Saws
These categories of tile saws are sometimes referred to as masonry saws and they’re of 3 types;
- The dry hand-held saw; this is a simple saw that requires cutting tiles manually, it’s ideal for individuals that are working on small projects, it’s for simple projects that don’t require water.
- Wet hand-held saw; this saw too is a simple saw for executing small projects but need water to work effectively.
- Dry and wet hand-held saw; with this saw, you can work with or without a water source and still get good results.
These types of saws are easier to use. They’re operated manually and are compact in nature, and you can carry them to wherever you want with ease.
They require less maintenance and are very cheap. Almost everyone can afford to buy these small tools.
Even though they’re simple tools, one can still use them to make curved shapes and other shapes that your project demands. It’s just that you have to be careful with them and you can get as much accuracy as in more advanced wet tile saws. They consume more time since you’re operating the tool manually.
The third categories of tiles saws are the grinders. Grinders are even smaller than the hand-held saws. To most people they’re not even considered as saws, they’re referred to as cutters.
For anyone that’s not looking for advanced features, grinders can be a good start. Some grinders can be used without a power source.
Most of the job is done manually so you should expect to spend more time and accuracy is not guaranteed.
Now that we’ve seen the types of tile saws that are available, it’s time to look into some basic features which you should check in any tile saw before you spend your money on any particular saw. Finding all these features isn’t a must, it’s just a matter of knowing what your project needs and then choosing a saw that has the basic features you’re looking for.
Features To Look For In Any Tile Saw
Checking the cutting capacity of any saw is a must more especially if you’re a contractor that works with thick tiles or want to cut multiple tiles at a time.
You want a tile that comes with powerful motor and has sharp diamond blades so that it passes through thick ceramic materials and other hard stones with ease.
If you’re just using the tile saw for one time use, there is no need to look for a tile saw that has a large cutting capacity because they’re more expensive and you’re definitely not willing to spend much since it’s just for a one-time project and you’re dealing with simple cuts.
Versatility And Accuracy
Most tools claim to deliver more accuracy than any other tool but when you start using the tool you find out that it’s very hard to maintain accuracy because the device is shaking.
When it comes to accuracy you should look for a device that has less vibration because you can only achieve accurate results if you’re comfortable when working with the device.
Accuracy isn’t just enough, you want a more versatile tool that will allow you to cut different types of materials. You need a tile saw that is capable of making not only curved cuts but also all the different shapes your project demands. The saw should be able to make L and U shapes effectively.
You should also be looking for a tool that not only cut ceramic tiles but can also cut glass tiles and other hard stones.
Since most projects require that you make bevel cuts, you have to choose a saw with good beveling capacity.
A saw with a good bevel can make different angle shapes with ease. Look for a saw that has a wide range of angle cuts. Most saws lack even the standard bevel cutting capacity. There is the need to choose a saw that can make all the angle cuts you want in your cutting projects.
Without adequate power where will the saw drive the energy to spin the blades so that they can pass through hard materials?
Any tile saw you choose should have a powerful motor that power the blades so that they can yield maximum cutting capacity. Tile saws with less motor power won’t work to your expectations especially if you’re working on tough and complex projects.
A saw might have the perfect power but without the proper strength that won’t be useful.
Without enough power, you’ll be left with scramble workpieces and most of the time the saw will damage your working material.
When it comes to cutting tiles you need a motor that comes with about 15-amp power. This is enough to cut through most tiling materials without any bogging or material damage.
Portability And Dimensions
Searching for this feature is a must for contractors because they’re always moving from one location to another.
If you’re a contractor you should pick a tile saw that has ease of mobility. In a single day, you can move to different job locations. If you’re dealing with heavy duty saws things are not going to be easy for you.
You need a saw that comes with wheels so that you can move the device with ease within your working surrounding. Even if the saw a little bit heavy, you can move it around if it has wheels.
What’s recommended is that you shouldn’t choose a tile saw that will take half of your team to lift and load on the truck. Sometimes you won’t have access to such people especially if you’re a single contractor, that’s why it’s advisable for contractors to pick up the lightest tool but at the same time the most effective one.
When it comes to tile saws the strength of the blades and the material from which it was made plays an important role when making clear cuts. That’s what separates a tile saw with other cutting saws. Other saws have strong and sharp blades but they end up destroying the materials you’re working on, while tile saws are equipped with diamond blades that are well designed to handle cutting of brittle materials without causing any damage.
You should look for sharp diamond blades with good length. Some professionals suggest that when it comes to cutting tiles, the sharpness of the blades doesn’t really matter, they need to be strong and diamond coated.
With the right blades, you can achieve smooth and clean cuts for any tiling materials, even with delicate materials like glasses.
Without good blades, you will end up scattering the working pieces which is not what we’re looking for. We want maximum accuracy all the times. Without the proper set of blades, you cannot achieve sharp edges. Diamond blades are the perfect blades that will yield the best results when it comes to accuracy and smoothness.
Water Spray And Dust Collection
If you decide to work with a wet tile saw you should find a saw that comes with a water pump and reservoir with maximum holding capacity.
Wet tile saws are the best tools to work with because they’re more flexible. The water helps to cool down the blades which overheat most of the times due to friction and also lubricate the material so that the blades can pass through easily.
If there isn’t a good water spray you’ll experience excess heat and material damage. You’ll also experience some bogging when the blades are passing through the material.
On the other hand, if you’re working with a dry tiling saw, you need a dust collection system that’s effective and easy to use. Without a dust collection system, it’s going to be difficult for you to view your cut lines because you’ll be surrounded by flying dust and debris. That’s why it’s important to choose a good saw that’s capable of absorbing most of the dust generated so that you can have clear visibility and also avoid inhaling harmful substances into your lungs.
Inhaling dust particles into your lungs over a long period of time lead to serious health problems like asthma. If you’re inhaling dust for a long time, you’re placed at higher risk of certain diseases that are difficult to cure.
Make sure to choose a device can collect over 90% of the dust that has been generated if you really want to enjoy working with the tool. Even the smell of dust can be disturbing.
Availability Of Accessories
Chances are as time goes by you’ll want to replace some parts of the saw and if spare parts are hard to find then that’s the end of using the tool.
It’s advisable to look for popular brands that have spare parts everywhere in the country and in any tech shop. Without the availability of spare parts, you’ll end buying multiple saws within a short period of time.
Accessories are important when it comes to upgrading your saw, more especially blades. Most of the times you’ll need extra blades when dealing with tough jobs. If the type of blades that will fit your device isn’t found in the market you will have to change the device and that’s a waste of money from your own part.
The absence of accessories that will fit in with your tile saw means you’re limited to perform certain tasks and this is a drawback from your own side.
Check popular tools and brand before making any purchase and later on, you’re going to save yourself a lot of money because accessories that are available everywhere are cheaper than those accessories that are difficult to find. As a general rule “scarcity leads to increase in price”.
Size Of Your Job
If you’re going to be cutting bulky and multiple tiles, simple saws aren’t your option. You should understand the strength of your material.
If you’re dealing with thick and hard brittle materials you have to go with a heavy duty saw. Working with heavy duty saws will cut your working hours because you can line up multiple tiles and then allow the saw to cut through them with ease.
Most heavy duty saws come with powerful motors so that they can drive the blades at a higher speed.
If you’re on a tight budget, the heavy-duty saws aren’t for you, because they cost way more than lighter saws and it’s because of their effectiveness.
The type of saw you’ll get depends on how much you’re willing to spend.
Professional workers will want to go with the heavy duty saw because it can handle any type of project at the working site.
For the simpler tile cutting saws, you can buy one at only $40-$100, for the bigger ones, it depends on your project requirements.
When it comes to choosing tiling saws you have to be careful because they’re powerful and they produce a lot of dust particles more especially if you’re working with the dry saws, you can end up throwing dangerous particle in your eyes. It’s advisable to work with wet a saw that comes with water pump which will prevent dust from disturbing your working environment. You also don’t want a pump that over spray excess water, you need a tile saw that comes with adjustable water pump that capable of adjusting the water spray. Choose a device that comes with powerful brakes so that you can stop the machine immediately after pulling the stop trigger and also make sure that your hands are no where closer to the spinning blades. These days tiling saws come with double switch feature, it helps users avoid unexpected switching of the device, they are equipped with extra switch-ON feature that provide extra safety to the user.
Vibration Absorption Mechanism
You’ll find it difficult to work with a device that has too much vibration; a good tiling saw should be equipped with vibration absorbing materials such as elastomeric which some manufacturers use to make a good handle grip, because that’s where absorption of vibration comes into play. You should choose a saw that has a good handle grip, with too much of vibration you’re placed at high risk of fatigue, and cannot be working with the tool for longer hours, you end up getting tired after working for a few hours.
Choosing a good tile saw is trickier than choosing any other type of cutting tool and this is because of the nature of the material you’ll be working with. Speed, versatility and accuracy are a must for any tool you choose to work with, extra care is needed when selecting the right tile saw. When buying you should check some of the most important factors which we mentioned earlier and you’ll find yourself working with the right tiling saw. before buying any tool make sure that you have tested the tool and you’re satisfied with its performance, you can consider renting the tool you want to buy so that you can test its performance for days, if you can’t find a rent, visit some workshop in your neighborhood and see if you can a hold of any tool you want to buy, if you’re comfortable holding the grip then you can move ahead and buy it, don’t just buy because you’ve read marketing pitch.
It is also a good idea as a new user to buy used and refurbished products since they’ll cost you less than what you’re buying a new one, but you have to make sure that it doesn’t come with any default that can restrict you from using some useful features of the saw. All these is to help you make the right decision more especially if you’re on a tight budget. When you finally understand how the saws work you can then move ahead and buy any new saw that you believe can meet your expectations. If you still prefer to buy a new tile saw it is important that you seek advice from professionals who have tested numerous tools over the years, if you can let them know of all your project needs they can suggest a good tool so that you don’t end up buying the wrong one. Remember that there isn’t the idea of best tool for anyone; it’s all about knowing your project needs and then choosing the right saw that will deal with the project.
When you’re finally done with researching a good tile saw and you found a good one, it’s time to look for consumer reviews and ratings, and also compare prices from different stores. A good quality tile saw will have a lot of positive feedbacks and recommendations and will also have the maximum warranty. Look for tiling saw with a minimum of 3 year warranty and the one that also offers a good customer support in case you need help in setting up the device, compare prices and choose a store that offers the best deals.