Circular saw comparison
Table Saw Vs Circular Saw
Most DIYers get confused when it comes to deciding on whether to choose a table saw or a circular saw, most people face this challenge more especially when they’re on a budget and can only be able to afford one of them. But as a professional user of cutting tools, you need to have both tools in your workshop because they all come with their benefit.
For beginners who’re just starting out in the world of woodworking and don’t have much money to spend they should start investing their money on a good circular saw because they’re less expensive and are very effective, they can also deal with most of the cutting task in the workshop, for experienced woodworkers they already know what these saws are capable of doing, so it all comes down to their project requirements.
Every woodworker or craftsman invest a lot of money on power tools that will help him deal with the various cutting tasks in the workshop, without the proper tools it’s going to be difficult to run the workshop effectively. There are various types of cutting tools to choose, from band saws to scroll saws and jigsaws.
In this article, we’re going to talk about circular saws.
Any type of saw you choose has its own specific uses, some are designed to make straight cuts and they do better than any other power tool, while some are designed to make miter and angle cuts more than any other device.
Before buying any tool it’s good to know all the features and specifications it should have before investing your money on it.
In this circular saw buying guide we’ll look into what circular saws are, the features you should be looking in any circular saw, some tips that will help you make the right buying decision and then lastly review some of the best circular saws that are currently available in the market.
What’s A Circular Saw?
Before going into the details you need to first understand what circular saws are and what they’re capable of doing in the job site or in the workshop.
In simple terms, circular saws are hand-held power devices equipped with flat blades and are used for cutting wood, metal, and plastic.
Circular saws are best used in projects that require smooth and straight lines cuts, they’re ideal for use in projects that demand the changing of blades multiple times when working on different materials with different strength.
Circular saws come with a switch closer to the handle so that it’s easier to use for the operator. Circular saws are one of the safest cutting devices to work if you really don’t want to compromise on your safety.
Benefits Of Using A Circular Saw
With a lot of models and brands out there, it’s going to be difficult to decide whether a circular saw is worth your investment or not.
Buying a circular saw is among the best investments you can do for your workshop if you’re a regular user of wood, metal, or plastic.
A circular saw will definitely revolutionize the way you handle cutting task in the workshop, they’re easier to use even for beginners.
Circular saws are your best options if you want to obtain clean cuts for your working pieces.
The circular saw is the perfect tool for cutting and tearing various materials, they’re also good when it comes decorative punching. In order to make use of the tool for cutting or tearing, you only need to provide support for the working piece against a stable and solid surface; you then start carving the pieces from the material.
Circular saws also can allow the user to make bevel and plunge cuts without the need to change another set of blades.
Making bevel cuts is possible by positioning the blades at the right angle so that you can start cutting the material at the desired angle. You can place the blade through the workpiece or just cut off some part of the surface.
Most circular saws can make bevel cuts, it’s just that the outcome depends on the experience of the user, each circular saw come with clear instructions on how to make clean bevel cuts.
Another use of circular saws is in making plunge cuts.
Making plunge cuts is similar to making straight cuts, the only difference is that plunge cuts are initiated from the middle instead of starting at the edge.
For DIYers that are working on their roof or doing some remodeling projects, a circular saw will be really helpful to them because it can perform most of the cutting task you’ll be dealing with in such projects, with the right set of blades a circular saw can make large cutting depths than most other cutting tools that are available.
Cordless Or Corded Circular Saws
Before you start looking for any circular saw there is the need to figure out whether you need the cordless or corded version.
If you have a consistent power supply in your workstation you should choose to work with the corded version because most of the times they’re more powerful and effective since they have enough power to drive the motor.
On the other hand, if you sometimes struggle with the power source and like to work with a portable device, then the cordless version might be your best choice.
The cordless versions are a good option for individuals or contractors that that move from one location to another, with the cordless circular saw they will not worry about the power source.
Left-Handed Vs Right Handed Circular Saws
The next aspect to consider before buying any circular saw is the side you work on the most, you want to make sure that you’re comfortable working with any circular saw you choose to work with.
Most power tools are designed for right-hand use only, but if you’re a left handed-person which is rare, there are saws designed for people like you.
There are tools that are even designed for both left and right-hand use. If you can find one with such feature it’s better to go with it since it’s more versatile, even if you’re right-handed there are projects that might require working on the left side, in such situations circular saws with such feature can be really helpful.
Features To Look For In Any Circular Saw
Now it’s time to see some of the features you should look for in any circular saw, the features that are equipped in any circular saw will determine its performance and its stability.
It’s important to check out for these features or you’ll end up jumping from circular to another and this will result in wasting a lot of your hard earned money.
Choosing a good grip is a must because it will decide on the comfort you get when operating any circular saw.
There is the need to hold the handle of any device before buying it, the handle of a good circular saw should be made with soft material like rubber to provide an excellent grip to the user.
A good grip will give you more control over the device during operation; it will reduce the vibration produced.
Without a good grip, you can’t use the device for long hours, you’ll get tired after working for a few minutes and bad grip will also place the user at a high risk of fatigue.
A good circular saw should have a trigger that’s easier to reach and also has a lot of protective measures.
You should be able to reach the trigger with your thumb easily without the need to keep the device, and this also applies when making bevel cuts.
If you had to change the location of your hand before reaching the trigger then you comprise on your grip comfort and this can lead to unexpected accidents.
You should avoid any circular saw that requires you to move your hand before reaching the safety button. These type of saws are awkward to work with.
Weight also plays an important role when it comes to the selection of circular saws.
You should determine how you want to use the saw. If you’re the type that moves to different job locations daily, then a lightweight device will be the best choice for you because you’ll have easier mobility, but on the other hand if you have a workstation where you spend all your time working with the saw, going with the heavy duty ones will be better because they’re more powerful than the lightweight ones.
The lightweight circular saws also aren’t left behind when it comes to performance if you choose the right one.
Depth Adjustment Settings
Setting up the depth adjustment is very important because you’ll be dealing with different materials that have different thickness.
If it’s difficult to set up the cutting depth you won’t enjoy working with your circular saw.
The depth scales should be easier to reach and shouldn’t be something that’s complex for you to manage.
Most of the times we deal with cutting of various shapes in our projects.
A saw with poor beveling capacity can’t fully satisfy your cutting needs.
Look for a circular saw that has a wide range of bevel settings. Some saws come with 5 degrees interval starting from zero, while other saws have an interval of one degree only. You should go with the one-degree interval or a saw that comes with the shortest interval. This helps you make the precise bevel angle you want to make at each level.
Who doesn’t want to obtain a perfect accurate cut? If your saw can’t provide you with accurate results then it’s of no use.
Choose a circular saw that comes with excellent precise cutting capabilities. It should be able to follow your cut lines accurately and you should have excellent blade visibility and guard retraction. These features will help you get a clear visibility of your cut marks during operation and will help you obtain precision cuts smoothly.
Visibility is really important when it comes to getting accurate results.
If the blades aren’t visible enough to allow you see through, following the cutting line will be difficult.
The blades of the saw shouldn’t be facing you, because your cut line will be unobstructed, but if the blades aren’t towards you, there will be a challenge for you to view the cut lines because your visibility is blocked by upper guard casing, your hand that’s at the front of the knob, or the retracting lever.
The Lower Guard
The lower guard should be well designed so that it can retract freely when making cuts with the device no matter what the cutting angle is or blade depth.
The best guard to choose is the one with an angled lower edge and has a rounded lobe so that it can ride up on the working pieces.
You should choose a lower guard that’s made with cast iron and the one that has a rough edge instead of the one that’s perfectly smooth.
The shoe plays an important role when it comes to making bevel cuts.
Most saws nowadays have a shoe that will cut away from the middle and this will produce a small bearing surface to keep the saw steady.
If there is variance in the shoe flatness more especially along the width, it will make the saw tilt and can bind during your cutting process. This type of bending will affect your angle settings and result in poor shapes.
To get the best result you should test out the device first before making the purchase. Try to make angle cuts and see if it can do the job effectively.
Always remember that the saw should be flat and should have rough edges that are set parallel to the blades!
Extra Features To Look For
Since we’ve listed some of the basic features to look for in any circular saw, there are certain features that aren’t mandatory but are also very useful and will enhance the performance of your saw.
Some of the extra features to look for include LED light, which can help to illuminate your working space.
And also check for dust blower to minimize flying dust in your surroundings.
There are other accessories to check for depending on your taste; the more accessories a tool have the more expensive it’s going to be.
What You Need To Know Before Working With A Circular Saw
Check The Saw
Before you start operating any saw you should first conduct safety check.
Test the blade guard to ensure that it’s retracting properly and can snap back when it’s released.
Check the tooth of the blades to make sure they’re not broken or have chipped teeth; any blade with damages on it should be replaced or fixed immediately.
For corded saws check the power code to ensure there are no cracks and for cordless saws, you should make sure that they’re fully charged.
When tightening, loosening or replacing the blades you should unplug the device and if it’s a cordless saw remove the battery.
These are all safety measures that will help you minimize accidents when using the saw.
Inspect The Blades
The performance of your device will depend on the state of your blades.
It’s very important to check out the blades more especially if you haven’t used the device for a long time.
Check the blades to make sure they don’t have any rust or have become dull, and check blades with missing teeth.
You should also consider using strong blades, even if the one that comes with your device is weak, you should consider replacing with stronger blades.
The carbide tipped blades are the best blades to work with. They’re the best when it comes to crosscutting and rip cutting, adjust the blade properly depending on the type of material you would like to cut. Make sure that it doesn’t exceed more than ¼” ahead of the board’s edge.
With the right blades you cannot only cut wood, you can cut other hard materials like plastic, ceramic, aluminum or metal sheets. It can also be used in construction sites to cut concrete, stone and brick.
You can cut a lot of materials with a circular saw with ease, it all comes down the strength and settings of your blades.
Position The Saw Properly
There isn’t a rule that states the direction you should face when making a cut, but for more convenient use and performance the motor of the saw should be facing the largest part of the board which will not fall down when making a cut.
This ensures that the shoe and the base plate will be completely supported though operation and you won’t experience much weight of the saw.
Making Accurate Cross Cuts
The circular saw is the easiest tool anyone can use to make perfect square crosscuts in any given material.
You should hold up the saw in position so that the blade is on the cut line, you then move the square towards the base plate, then press tightly towards the edge of your board.
You should make sure that the blade is not in contact with the board, you now pull the trigger until the saw reaches its full or designated speed. Now you can guide the saw along the square so that you obtain clean, smooth and accurate results.
If you’re dealing with panels or plywood there is the need to provide a good support.
This helps avoid unwanted kickbacks when the blade is pinched during your cutting operation.
Precise Rip Cuts
Rip cuts are the types of cuts that are in parallel with the grain of wood or any material you’re using. This is in opposite with crosscutting which is across the wood.
A lot of circular saws these days come with rip guide that’s made with metal which is attached to the base plate of the saw.
This guide is good but it’s limited to the types of rip cuts it can make, it can make no more than 6”. The best option is to tight 8ft board in a position which can be used as a straight edge guide.
Avoiding Splintering Of Wood
When working with circular saw splintering most of the times happen on the top surface.
Of course, this isn’t a problem when working with floor joints or when cutting wall studs, but when you’re dealing with hardwood or plywood, it can be somewhat troublesome.
In order to solve this issue, you should place the panel or board with the surface looking downward, this way any splintering that arises will take place on the back side or the top side.
Clamp, Stack, And Cut
If you’re dealing with multiple plywoods that are of the same size, you should use the gang cutting technique.
You should stack multiple pieces of the same size together like four or five on top of each other, clamp them together and adjust the blade to the appropriate cutting depth so that it can cut through the materials. You then place your saw to cut through all the plywood at once.
Making Safe Bevel Cuts
Almost all circular saws have beveling capacity that’s up to 45-degrees.
The base plate is however tilted all over, the lower blade guard can catch on the edge of your material.
When this occurs don’t put more pressure on the saw. You should first release the trigger, raise the blade guard with your hand and then start making the cuts. Once you have cut like one inch into the working piece, you can now release the guard.
Making Long Straight Cuts
Sometimes you want to make long and straight vertical cuts on to a wall.
With a circular saw, you can achieve this with much ease, and all you have to do is to place the saw at the end and then start cutting downward.
By doing this you’re working on the same direction as the gravity, the weight of the saw is acting on the material, but if you’re moving upward you’ll experience a lot of weight since you’re against the gravity.
So here are some of the basic features you should be looking in any circular saw. We’ve mentioned some of the features to look for and the various types of saws to choose from.
When it comes to choosing any circular saw you should plan your projects carefully and examine the different types of cuts you wish to make. You then choose a circular saw that has the same cutting capabilities that your project demands.
Choose a powerful circular saw that’s good enough to cut through most of the materials you’re working with.
The circular saw should be able to cut hard materials like ceramic and stones, even if your project doesn’t require cutting of ceramics and stones. You don’t know what might happen in the feature, and that’s when your circular comes in handy.
Choose powerful motor because that’s the strength of your machine, less powerful motor doesn’t have the strength to cut hard materials, a strong motor and powerful blades can cut through almost every material you can think of in the workshop.
Best circular saw: Top 5 picks by Saw Guru
Skil 5280-01 Circular Saw Review
It’s designed with optimum performance and has a good size to power ratio. It’s a lightweight and portable device that can perform various cutting tasks in the workshop.
It weighs only 8.7 pounds, and the Skil 5280-01 circular saw has easier mobility making it a perfect solution for contractors that move to different job locations.
It’s a friendly machine sold at an affordable price. Any newbie can afford to buy this tool, within its category it’s one of the best cheapest saw to work with.
The Skil 5280-01 circular saw comes with a powerful 15 amps motor which is designed to give maximum power and accuracy.
This device has a power output of 2.5 HP. When it comes to speed it’s the best you can ever find within its category; it has a single no load of 5300 revolutions per minute. This helps the user obtain accurate results and finish his cutting task quickly.
It comes with 7-1/4” carbide tipped blade that’s very sharp and is very durable, it’s equipped with 24-teeth blades to make cutting much easier.
It can cut hardwood and metal sheets. It has cutting capacity of 1-15/16” at 45-degrees and 2-7/16” at 90-degrees. It can make bevel cuts of up to 51-degrees and has a positive stop at 45-degrees, this makes the tool to have a great cutting capacity when compared to other models within its category.
Accuracy is assured with this amazing tool because it comes with beam laser that provides a clear view of your cut marks.
It’s equipped with an effective dust blower designed to send dust away from working space.
The Skil 5280-01 circular saw comes with one year warranty. If you received damaged parts you make returns and get working parts, you’ll also get all the assistance you need to set up the device.
- It’s a lightweight device weighing only 8.7 pounds, this makes the device easier to transport.
- The laser guide helps the user obtain more accurate results.
- Has better bevel cutting capacity than most other circular saws that are within the same group.
- Kickback is at minimal because of the torque clutch.
- It comes with a bag for easier transport and storage.
- It comes with one-year limited warranty.
- The base which is made from steel isn’t as good as the one that’s made with magnesium.
Who Should Buy The Skil 5280-01 Circular Saw?
It’s an ideal saw which can be used for cutting metal sheet and lumber.
Dewalt DWE575SB Circular Saw Review
When it comes to power tools, DeWalt always comes into the list and that’s because of their exceptional quality.
The Dewalt DWE575SB circular saw also is a very lightweight device that weighs only 8.8 pounds, almost similar to the previous saw we talked about.
It’s one of the best lightweight saws to work with that can perform similar jobs just like heavy duty circular saw. You can move the tool around to anywhere you want and have less risk of fatigue that results from heaviness.
The Dewalt DWE575SB circular saw is powered by 15-amps motor and consumes about 1950 watts of power. This powerful motor gives the machine a no-load speed of 5200 revolutions per minute, which is a little bit less than the previous saw we talked about.
It is capable of making cuts quickly and at the same time allowing the user to have full control on the device.
Just like Skil 5280, this Dewalt DWE575SB circular saw model also comes with 7-1/4” blade. The cutting depth capacity is 2.55” at 90-degrees and 1.9” at 45-degree.
All these features make the tool very powerful to handle various projects in the workshop.
The Dewalt DWE575SB circular saw also has a great bevel cutting capacity. It can make bevel cuts of up to 57-degrees with 2 stops at 22.5 and 45-degrees. This makes the tool more versatile to be used in various applications.
The Dewalt DWE575SB circular saw is very safe to use because it comes with a responsive electric brake that can stop the blades immediately after pulling the stop trigger. The blades can be stopped within few seconds, and this is a good safety feature that helps prevent unwanted accidents.
It is also equipped with a dust blower that helps clear your cutting path from debris to give you more visibility and control over the device.
The Dewalt DWE575SB circular saw comes with a 3-year warranty.
- A lightweight device that weighs only 8.8 pounds, this provides easier mobility, and despite this lesser weight, it can still handle tough projects in the workshop.
- The lower guard is well designed to give a smooth guard protection.
- It comes with a tough chord that gives more durability when pulling the cord out.
- It has a great cutting capacity, it’s the best so far within its category, it can make the cutting depth of up to 2-9/16, and this also makes the device more versatile.
- The bevel cutting capacity is excellent; it exceeds other circular saws that normally don’t go beyond 45-degrees.
- It comes with a storage bag for easier storage and convenient movement.
- It comes with a three-year limited warranty.
- Since it’s a very powerful saw it’s more expensive than other circular saws, but the performance is also different.
Who Should Buy The Dewalt DWE575SB Circular Saw?
This Dewalt DWE575SB circular saw model is designed to deal with the toughest jobs in the workshop.
Since it’s a pricey device you expect it to perform better than other circular saws and that’s exactly what it does.
The Dewalt DWE575SB circular saw can be used in various workshop projects, DIY projects and can also be used in any construction site.
Worx WX429L Circular Saw Review
The next best saw that made to this list is the Worx WX429L circular saw.
It’s a compact tool but very powerful to handle any cutting task in the job site.
The saw is cheaper than other saws we mentioned above, but still, it’s not left behind when it comes to performance.
It’s a compact and lightweight device, this Worx WX429L circular saw comes with an unbelievable weight of 4.25, and this model could be the lightest of all saws you’ve ever come across.
The saw is the best choice for anyone that’s dealing with tight spaces and don’t want to use bulky saws because of their heaviness.
The Worx WX429L circular saw is 4-1/2” saw and is equipped with 24-teeth carbide tipped blades. The blades aren’t as thick as other carbide blades because it was designed to work better in tight spaces.
That’s why the blades of this model are thinner than other saws. This feature reduces strain and at the same time increase cutting speed and the performance of the device.
It’s a powerful device that offers a no load speed of 3500 revolutions per minute. This speed is enough to cut different materials quickly with little ease.
The bevel cutting capacity is 45-degrees and is very easy to adjust. If you position the blades to the left you’ll experience the maximum visibility and in turn, will give you more accurate results.
The ergonomic design of this Worx WX429L circular saw provides an excellent grip to the user and also offers more comfort.
Just like the previous saw on the list it also comes with a three year warranty.
- Setting up the cutting depth is really easy and can be done within a few seconds.
- The vacuum port it comes with is very effective; it’s capable of collecting most of the dust produced.
- It’s a light device, making it easier to move the machine around and less fatigue will be experienced when using the tool.
- It’s compact in nature so that it can fit into tight spaces.
- It’s very cheap, everyone can buy this saw.
- Three year limited warranty.
- The cutting depth isn’t really impressive to most people. We can say that it’s designed to deal with small to medium sized projects.
Who Should Buy The Worx WX429L Circular Saw?
The Worx WX429L circular saw is a convenient saw that can be used by anyone.
It’s designed to deal with tight spaces, this means it can be used by both beginners and professionals to deal with small and medium-sized projects in the job site or in the workshop.
It’s good for DIYers that deal with cutting tasks in their projects.
Rockwell RK3441K Circular Saw Review
It is extremely small compared to the previous one we’ve mentioned. It only weighs 4 pounds.
This device is exceptionally easy to handle. The tool can be operated with just a few fingers or with just one hand. You’ll experience maximum comfort when using the tool.
Users will experience minimum tool strain when working with the device. It has a uniform speed of 3500 revolutions per minute.
The cutting performance of this saw is really great and can match that of 7-1/4” circular saws.
The Rockwell RK3441K circular saw comes with a cutting capacity of 1-11/16” at 90-degrees and 1-1/8” at 45-degrees.
It’s capable of cutting 2×4 lumbar and can cut various metal sheets effectively despite its small and compact size.
Even though it’s a 4” saw, it can deal with projects which a 7” saw deals with.
It comes with a slim handle to allow you to hold the device comfortably, it’s designed to give the user a more enhanced grip.
A dust port is also available to help minimize flying dust within the surrounding, and finally, just like many other circular saws it comes with its three year warranty.
- This is so far the best portable device anyone can work with due to its small size.
- Its compact nature can fit tight workspaces.
- It has a good ergonomic design to give the user the best comfort, the handle is very small making it easier to hold the device with ease.
- It comes with a laser guide to help the user get the best results.
- Cutting depth can be adjusted with ease within a short time.
- Three years limited warranty.
- The Rockwell RK3441K circular saw isn’t capable of making bevel cuts.
Who Should Buy The Rockwell RK3441K Circular Saw?
The Rockwell RK3441K circular saw is a solid and powerful saw designed to deal with small projects in any workspace.
It’s a good option for DIYers dealing with home remodeling projects, and professionals also can use the device if they have small projects to execute and don’t want to deal with bulky saws.
But generally speaking, the Rockwell RK3441K circular saw is a good circular saw to start working with for beginners.
Dewalt DC390B Circular Saw Review
This Dewalt DC390B circular saw gives you the convenience to work freely without worrying about the power source.
This is a powerful cordless circular saw that is built to withstand tough projects at the worksite.
The Dewalt DC390B circular saw however doesn’t come with a battery in the package, you have to buy that separately. But if you’re working with DeWalt cordless power tools like the saw mentioned above, you can use the charger since they’re compatible.
Most cordless saws come as lightweight devices and this Dewalt DC390B circular saw isn’t an exception because it only weighs 6.3 pounds.
Lightweight circular saws are very popular these days because they’re more convenient to use and are capable of doing most of the cutting tasks you can think of.
It has thin blades that make the device very fast and also work in tight spaces just like other lightweight devices.
The carbide blades equipped in the device are very sharp and durable; they’re built to last for years without the need of any replacements.
The powerful blades it comes with drive the machines at a speed of 3700 revolutions per minute. This enables the device to make crosscuts and rip cuts faster than most circular saws.
The cutting depth is 2-1/4” at 90-degrees and 1-5/8” at 45-degrees. This Dewalt DC390B circular saw is capable of slicing lumbar with ease.
Anyone can use this great saw for various application whether in the construction site or for home remodeling projects.
The handle is well designed and less vibration is experienced when operating the device. The handle offers more comfort and reduces less risk of fatigue, and finally, it also comes with a three-year limited warranty.
- It’s a lightweight device that is easy to maneuver, weighing only 6.3 pounds makes it easier to operate and control the device.
- It has a wide range of cutting capabilities.
- It’s a sturdy machine that’s durable; it’s made with high strength magnesium.
- It makes less noise, this also gives more comfort to the user.
- Three-year limited warranty.
- Battery and charger aren’t included in the package, you have to buy them separately.
Who Should Buy The Dewalt DC390B Circular Saw?
When it comes to remodeling, this is the first saw you should think of.
It’s a durable device that can last for years.
If you’re DIYer with lots of cutting projects at home you should definitely check out this saw.
Best Rated Circular Saw
Craftsman 3284 Circular Saw Review
One of the best rated circular saw to work with is the Craftsman 3284 circular saw.
This saw can cut whatever that comes into its way, the saw isn’t perfect though as it lacks some features, but the truth is that every saw lacks some features and can still be effective when it comes to cutting different materials in the workshop.
The Craftsman 3284 circular saw is one of the best circular saws one could buy and get the best return on his investments.
It’s easy to operate and has good cutting capabilities.
It comes with all the basic features that are present in any decent saw out there. This saw will help you achieve the best possible result with your cutting projects.
The Craftsman 3284 circular saw isn’t a lightweight device like the other saw we mentioned earlier, but it’s a solid and stable saw.
This tool isn’t also considered as a heavy saw because it still doesn’t weigh much, it weighs about 12 pounds only.
Everything is well balanced with the design of this saw; you can use it to cut through various materials such as hardwood or lumber.
The Craftsman 3284 circular saw comes with a rip fence, which is a feature you hardly find in circular saws. This feature allows the saw to make the same cuts on both sides of the saw without the need to make measurements all the time. This feature will save the user more time when working on multiple materials that are of the same size.
The Craftsman 3284 circular saw comes with a good laser guide for improved accuracy. It will guide the user to follow the cutting mark drawn on the workpiece. Making straight and accurate cuts aren’t going to be difficult with this machine, just set the laser guide along your cutting line and you’re set to go.
Best Budget Circular Saws
When it comes to the budget, the SKIL 5280-01 will take the lead.
Despite being a cheap product it’s still an effective tool to work within the workshop.
The 15-amp motor it comes with is responsible for its high performance and efficiency. It offers a no load speed of 5300 revolutions per minute.
The efficiency of this device is as a result of the single beam laser technology. This laser guide will help the user obtain straight and accurate results.
The laser guide also works with the dust blower to help keep workpiece clean and allow you follow your cutting lines; you’ll get more visibility and also get the best accuracy you’ve always wanted to get.
The SKIL 5280-01 circular saw is a powerful saw you can rely on due its affordability and high performance.
If you’re the type that deals with making different shapes and angles you definitely need to add this tool in your toolbox. It comes with an indication that will notify the user when the saw is ready for use.
The SKIL 5280-01 circular saw is equipped with a lot of safety features you couldn’t possibly imagine. Why don’t you give this device a try and soon you’ll definitely realize your money is well spent!